Видео

They all leak oil so unloosen the oil cap after you're done then re tighten

Pull the choke on and off it will give you high idle

I don't like premix fuel my saw seems to run hot

Get the long handle wrench

What’s the actual name of the thing that costs $5?

Looks simple and handy but unfortunately it is now $35! Good video.

What a difference three years makes. The product you bought for $299 with a 9ah battery now is priced at $329 with a miniscule 3ah battery, not such a great deal.

Thanks for the tutorial. I am installing this now. The link to the rubber caps goes to the 14MM option. Is this what you used?

So i removed my blades and cleaned it and put it back together, it seems like some of the blades from Disc 1 are hitting the blades on disk 2. What could be the reason for this?

THE WIFE IS OBVIOUSLY AN OR NURSE OR DENTAL ASSISTANT WITH THE SUCTIONING OF CONCRETE DUST. GOOD JOB! 😃

I was just going to say keep one for your ac condenser too. Great video thanks for sharing brother!

Its basic binary - 0 means off 1 means on

Or you can get a cat🥰

This was so clearly explained. Just what I need to know preparing for a cabinet install.

Stopped the video soon as he says “blade” when referring to the guide bar!

You should have made a demo video once you finished with the guards installation.

Great video. The last video i watched from this old house used a laser. Absolutely ridiculous. Get the bottom level, and door reveals will tell you the rest

GeT A fOrD he says. 😂🫣

This is exactly not how to install a filler panel. The last tool on the Earth that you need to use is a jigsaw, all that will do is give you a wavy chipped edge, you need either a table saw or the rail and plunge saw, then fit filler to cabinet, and to wall edge are tight, and finish wall edge with a tight bead of caulk 💪🏻

So you dropped $2k on a few speakers. Yep, affordable😂

How strong have they been? I.E using more as a fence, kids climbing on them. Getting hit with soccer balls etc.

Thank you, I’m about to hang some prehung french doors in front of my office opening. I a little worried 😧 because I’ve never done anything like this before, but to pay 💰 someone would cost me more than the doors 😢. The shim trick is just what I needed to see. Thanks for sharing and I will follow up next week to let you know how it went. 😊

So much for needing a key.

Great idea, worked well.

Hello. Thank you for the video. Any reason why we couldn’t use 8ft long boards?

Very helpful! Great idea! Thanks!

Very nice. It something I was looking for to connect astheically my fence to my garbage can fence

2:39 LOL nice!

and 6 hours later you have a 30-45 min job done haha---. this is in no way a knock on your technique of finishing drywall, more power to you, but I just have a few comments. first off don't jab your drywall knife into the corners like this you run the risk of cutting the tape. second while using the sponge is not wrongbits just not necessary. third thing is the "steps" are not in the correct order if this is, as he stated, the final coat you could go around with a drywall knife and scrape the edges but imo at this point another unnecessary step. the important thing is that at this point you should use the pole sander first and brush down everything and last thing would be the smaller drywall sanding sponge this is the check sanding stage you need to take a light and the sanding sponge around the whole job and sand with the light shining on the areas you are sanding so you can check for imperfections that may need more drywall mud or more sanding this is where you should definitely be wearing a mask. as far as the type of light to use I use one of those trouble lights that have the silver metal cone over the light bulb I use a 100 watt bulb they are under $15. this is the correct way to finish out drywall

Thank you for the video. You & your family did an awesome job. Thank you for all of the information for the sewing parts. We need to replace the slings on 2 chaise loungers.

Thank you, i needed that.

I highly recommend staying away from mammotion. I have owned a version 1 Luba 5000 for a year now. The rubber seals around the cutting motors disintegrated within 6 months. I contacted mommotion. They wanted pictures, I sent ten pictures taken at different angles showing that the rubber seals are all shredded and disintegrating. That was over three months ago. I have tried connecting them again. By phone, I get put on hold and they NEVER come back after being on HIOLD for over THREE hours. I email them, no reply from a live person, only their automated reply system. I have been willing to buy the rubber seals, just cannot get anyone to talk to or reply to my emails. What good is saying you have a two year warranty and good C/S when there I absolutely no warranty and no customer service. So I am back to pushing a lawn mower and have a $3000 luba 5000 for a door stop for my shed. Luba is junk, stay way from this company, you will be throwing your monaway.

What I like to do is pull the battery out put it on the bench and shine a flashlight from behind it, and you can see the water level and each cell should be level with each other

Love the T-shirt!

But I don't want to tear the dry wall out.

I don't understand why people have unfinished garages just painted it's so simple

I just got a universal bushing head that fitted to the 60v dewalt flexvolt powerhead seamlessly. great for thick rosebushes, that the string head just couldn’t handle. 15-20 minutes on a 9 ah battery…seems like a short run time…but I don’t mind taking frequent breaks. Super powerful!

I have a subeoofer there.

Thank you for sharing what you know,very helpful.

Dealership charged my mom $1500 to fix her Passenger Rear sliding door when it stopped working completely. Good to known its relatively DIY. Been working on cars here and there so I can definitely tackle this issue if it happens in the future for the rear driver sliding door. Thanks!

Bros a fuckn nerd. Thanks for the refresher buddy ❣️

I’m actually having a Rheem heat pump water heater put in next week and found your easy steps maintenance super helpful in my decision process, thank you for the great video

Have you had issues with the suctioning power ? I got mine worked well one time and now it appears that that it’s not suctioning at all.

Them betters are gonna die faster.

amzn.to/4b1VcBL

I didn’t even need to drill a hole, just made a loop with baling wire and twisted it a couple times.

This is a lot of money, I wish they would just put bigger windows/doors on homes in the first place.

Stihl is easier to work on. Also Stihl buy the oil and get 2 year warranty.

Is there a reason to not just take the reading straight from the pool?

My GOAT, thank you boss